Compiling Asterisk Under Aurora 2.99

[Plasma]

Hey folks, it's been a while, but I'm once again dusting off my Sun hardware
to see if I can get it to do something useful.



I'm just downloading the 2.99 DVD ISO which I plan to install on my Netra T1



I'm wanting to use the box as an Asterisk PBX, and I have a Digium a400p
OpenVox PCI Card.



I'm assuming the install isn't going to be without problems, just wondered
if anyone had, tried / failed / succeeded in getting this working before?



My Linux knowledge has come on a fair bit since I last emailed the list /
had a play with Aurora so I'm hoping it's not going to be as painful this
time!



Cheers



Kevin

[Mr. James W. Laferriere]

Hello Kevin ,

Post by Plasma
Hey folks, it's been a while, but I'm once again dusting off my Sun hardware
to see if I can get it to do something useful.
I'm just downloading the 2.99 DVD ISO which I plan to install on my Netra T1
I'm wanting to use the box as an Asterisk PBX, and I have a Digium a400p
OpenVox PCI Card.
I'm assuming the install isn't going to be without problems, just wondered
if anyone had, tried / failed / succeeded in getting this working before?
My Linux knowledge has come on a fair bit since I last emailed the list /
had a play with Aurora so I'm hoping it's not going to be as painful this
time!
Cheers
Kevin

From a friend of mine who tried this under Aurora 2.0 , says that if
all you want to do is use SIP/IAX Asterisk would compile fine , Just that
Zaptel wouldn't compile at all . So it appears that at that time the drivers
could not be successfully built . But you can always give it a try . And
report back .
Hth , JimL